Fusion Bath
Break the bond of the most difficult surface contaminants with this specially-formulated low pH detergent. Applied in a thin sheet of foam that envelops the car and dazzles customers.
Step 1: Following the high pH presoak, the Fusion Bath loosens any remaining contaminants and cleans the surface of the car. A sheet of foam is used to give the sensation of being completely encased in a blanket of soap and to put on a good show for both the current and upcoming customers. The chemical used here is the first of two low pH applications that neutralizes the presoak and prepare the vehicle for the next step of the process that continues to lower the pH of the vehicle’s surface.
| Specifications | |
|---|---|
| Applicator Style | Foam Sheet |
| Recommended | Foaminator Maxx Sheet |
| Chemical | Fusion Bath |
| pH | Low |
| Available Colors | Red • Blue • Purple • Green • Yellow |
| Lighting | |
|---|---|
| Recommended | 2ea. MFR-400 |
| Alternate | 2 GEG |
Fusion Prime
Lift embedded road grime to prime painted surfaces for total adhesion of the Fusion Seal Paint Sealant. This ultra-low pH detergent is applied in precise streams that penetrate prior foam applications.
Step 2: Fusion Prime is an ultra-low pH chemical that readies the surface of the vehicle for better adherence of the upcoming sealant and at the same time makes the painted surfaces really shine. Here, a stream provides better impingement of the chemistry on the vehicle to make sure all of the surfaces receive the treatment.
| Specifications | |
|---|---|
| Applicator Style | Stream |
| Recommended | Foaminator Maxx Stream |
| Chemical | Fusion Prime |
| pH | Ultra-Low |
| Available Colors | Red • Green • Purple • Yellow |
| Lighting | |
|---|---|
| Recommended | MFR-400 |
| Alternate | GEG |
Fusion Rinse
Break down and remove foam residue to completely expose painted surfaces to Fusion Seal Paint Sealant. Infused into a waterfall rinse that flushes all grooves, crevices, cowlings, and behind mirrors.
Step 3: Fusion Rinse is a thin sheet of water with a chemical additive that helps dissipate any remaining foam on the vehicle. This step clears out the vehicles crevices and removes any left behind soap or hard water in preparation for the upcoming paint sealant.
| Specifications | |
|---|---|
| Applicator Style | Rinse Stream |
| Recommended | Rinse Stream Maxx |
| Chemical | Fusion Rinse |
| pH | Neutral |
| Available Colors | Clear |
| Lighting | |
|---|---|
| Recommended | MFR-400 |
| Alternate | GEG |
Fusion Seal
Lock out dirt and protect painted surfaces with our patent-pending formula that chemically bonds to the surface. Applied in dramatic overlapping droplets that evenly spread for continuous coverage.
Step 4: Fusion Seal is a paint sealant that, with the help of the Fusion Prime, bonds with the vehicle’s paint to capture the shine and smooth out the surfaces. It forms a glossy shell that protects the paint against UV rays and contaminants. Applying it in a stream of droplets ensures the chemical penetrates and completely coats all surfaces.
| Specifications | |
|---|---|
| Applicator Style | Stream |
| Recommended | Foaminator Maxx Stream |
| Chemical | Fusion Seal |
| pH | Neutral |
| Available Colors | Red • Green • Blue • White |
| Lighting | |
|---|---|
| Recommended | MFR-400 |
| Alternate | GEG |
Fusion Wax
Enhance the depth and quality of the shine you deliver your customer with our exclusive poly synthetic wax blended with genuine carnauba. Applied in a cascading sheet of airy foam for complete coating.
Step 5: Fusion Wax provides an additional layer of protection on top of the sealant that helps the vehicle retain the benefits of the full Fusion Process™ for a longer period of time. The customer can feel the layer of wax that adheres to the vehicle. The use of a light and foamy application helps dissipate the wax so that it runs over all of the surfaces of the vehicle and provides an even coating.
| Specifications | |
|---|---|
| Applicator Style | Stream |
| Recommended | Foaminator Maxx Stream |
| Chemical | Fusion Wax |
| pH | Neutral |
| Available Colors | Clear |
| Lighting | |
|---|---|
| Recommended | MFR-400 |
| Alternate | GEG |
Fusion Rain Repel
Repel water and improve all-weather glass visibility with this hydrophobic spray application. Applied to glass surfaces with precision-targeted manifolds.
Step 6: Fusion Rain Repel is the glass specific step of the Fusion Process™. The applicators are targeted at the glass surfaces of the vehicle and apply the chemical in a fanned spray. Once the Fusion Rain Repel is applied, water will bead and run off of the glass providing additional safety and visibility in adverse conditions.
| Specifications | |
|---|---|
| Applicator Style | V-Jet |
| Recommended | Banana V-Jet |
| Chemical | Weather Guard |
| pH | Neutral |
| Available Colors | Yellow |
| Lighting | |
|---|---|
| Recommended | MFR-400 |
| Alternate | GEG |
Grow your Car Wash!
Download our new eBook to learn about industry-leading marketing tips.
